Megger DLRO 10 Ductor for Hire

The DLRO 10 Digital Microhmeter is a lightweight robust instrument which is equally at home in the field or in the laboratory.
Typical applications for the DLRO 10 are:
     - Switch and contact breaker resistance 
     - Bushbar and cable joints
     - Aircraft frame bonds and static control circuits
     - Integrity of welded joints
     - Intercel connections on battery systems up to 600V peak
     - Quality control of resistive components
     - Transformer and motor winding resistance
     - Rail and pipe bonds
     - Metal alloys, welds and fuse resistance 
     - Graphite electrodes and other composites 
     - Wire and cable resistance
     - Transmitter aerial and lighting conductor bonding

Features
     - Four terminal resistance method shows the true resistance of the item under test
     - Autotmatically applies forward and reverse currents which cancel out any out standing voltages across the sample under test
     - Checks for undue noise during measurement, reducing the possibility of recording the incorrect results
    - Automatically detects continuity in P and C circuits, preventing erroneously high reading to be taken due to high resistance contact

Technical Specifications
     - Test method: single cycle reversing dc ratiometric measurement - average result display
     - Test current: Accuracy +-10% : Stability <10ppm per second
     - Battery capacity : 7Ah NiMH rechargable
                             Life : Typically 1000 x 10A tests before recharge
     - Charging rate: 2.5 hours to 90% capacity, 4 hours to full charge

Measurements
     - Size 220mm (8.6") x 100mm (4") x 237mm (9.5")
     - Weight 2.6kg (5¾lb) including battery

  Megger DLRO 10 Ductor Datasheet